Riverside’s village code has received a swath of updates following approval from trustees at their May 16 village board meeting, bringing clarity and specifications that village staff said in a memo would be “immediately useful.”

The changes affect the sections of the village’s code on business regulations, building regulations, and health and sanitation. Broadly, they will enable Riverside staff to better penalize contractors who violate village protocols, request as-built plans to verify that construction plans have been followed, ensure best practices are followed when installing radon control systems, protect village trees from nearby construction and ensure stormwater runoff does not overflow onto adjacent properties or public rights-of-way like the sidewalk or street.

Penalizing contractors

The first change to Riverside’s village code allows the village to revoke a contractor’s business license and ban them from conducting business in town if they violate provisions of the code, with one exception.

Those violations, said Assistant Village Manager Ashley Monroe, include people abandoning a jobsite, leaving residents without a contractor, leaving a jobsite open and dangerous for people and animals, failing to call for inspections, and leaving work undone.

The new language specifies that a contractor will have their license revoked, and they will be banned from doing business in town for two years if they violate village code provisions on “three or more occasions during a 36-month period.”

The change also establishes an appeals process for contractors who have had their business license revoked. The village manager will review appeal requests before deciding to affirm, modify or reverse the revocation. If the contractor isn’t satisfied, they can request another appeal before Riverside’s village board, which will render a final decision.

As-built plans

The second change comes to the section of the village code on building alteration. This part of the code had only dictated that certificates of occupancy must be issued for newly built or altered buildings before they can be used.

Now, additions to the code have given Riverside and its staff the ability to request as-built plans, which it can use to verify whether approved construction projects were completed accurately.

“This opens the door for other types of projects where we would commonly ask for [as-built plans] or need to: for grading, paving … or other types of larger-scale projects, we spell out exactly, for staff, when it would be helpful to have [them],” Monroe said.

The new language in the code specifies that property owners must provide as-built plans to village staff upon request, as they are “crucial for compliance verification, future maintenance and as a record of the approved construction.”

For newly constructed homes and garages, as-built plans must reflect the final conditions of the structure, including its layout, dimensions, utility connections and other relevant information.

For additions to homes, as-built plans must show the existing structure, the addition and any alterations that were made during construction.

For projects involving paving or grading — that is, reshaping the land itself — as-built plans must include the existing and finished grades, drainage patterns, measures to control erosion and other details in order to “document the final topography of the site.”

Radon control

The third change is the largest to the code itself, with the addition of an entire section governing radon control systems.

“For the most part, it observes the state code requirements for radon, but it adds a provision that we’d like to create a dedicated circuit to make sure those radon mitigation systems continue to function,” Monroe said.

The new text says that a radon control system will be provided for all new residential structures with four or fewer “dwelling units.” It specifies that radon control systems must be installed by a licensed professional, as dictated by state law, and clarifies that they each must be powered by “a dedicated and labeled circuit.”

Tree protection

The fourth change affects the section of the code on protecting public trees from nearby construction, allowing for enhanced protection through more flexible standards.

The code calls for a 72-inch-high chain link fence with big posts. Monroe said that they’re opening up the code to allow additional fencing methods and to permit not only public works but also the building department to approve tree fencing.

Other fencing methods include “orange or brightly-colored plastic or vinyl material” that is used in construction work and can sometimes be called snow fencing or safety fencing. Those kinds of temporary fences, which are now allowed by the village code, must be 48 inches or taller.

Stormwater runoff

The fifth change to Riverside’s village code lays out provisions for where stormwater discharge sites on residential property may be located relative to adjacent properties and the public right-of-way.

“Every single week, most days, we have concerns from residents about water management and stormwater management in town. When we run into an issue where people are either unsure of where they can drain, where to install sump pumps, the sump pump discharging into the right-of-way,” Monroe said.

The new section says any discharge of water must be directed so it does not flow onto adjoining properties or public rights-of-way. Stormwater discharge “must be let onto a pervious surface” at least five feet from the closest property line, and all water runoff must stay 10 feet away from the right-of-way.

The new language also specifies that final discharge locations must be approved by village staff.

“We know lots are tight,” Monroe said. “There’s really different challenges in the community, but we’re hoping that this flexibility also provides more guidance.

Stella Brown is a 2023 graduate from Northwestern University, where she was the editor-in-chief of campus magazine North by Northwestern. Stella previously interned at The Texas Tribune, where she covered...